Categories  
8K Super Encoder
R8(8K UHD Encoder)
D8(8K UHD Decoder)


4K ST2110 IP Encoder and Decoder
R6(2110 IP Encoder)
D6(2110 IP Decoder)


4K 12G-SDI H.265 UHD Video Encoder Decoder
R4(4K 12G-SDI H.265 UHD Video Encoder)
D4(4K 12G-SDI H.265 UHD Video Decoder)


Multichannel
HD Video H.264 Encoder Transcoder Decoder Platform
RTD Platform1(encoding, 4-channel, IP)
RTD Platform2(encoding, 4-channel, IP + ASI)
RTD Platform3(encoding, 8-channel, IP)
RTD Platform4(Transcoding, IP)
RTD Platform5(Decoding, 4-channel, IP)
RTD Platform6(Decoding, 8-channel, IP)


One channel
HD Video H.264 Encoder
R3(H.264 HD Encoder)
R2(MPEG-2/H.264 HD/SD Encoder)


One channel
SD Video MPEG-2 Encoder
R1(MPEG-2 SD Encoder)


HD Video RTMP Stream Pushing Encoder
RP1(one channel)
RP2(2-channel)
RP4(4-channel)


HD Video RTMP Stream Pulling Decoder
DP1(HD Video RTMP Stream Pulling Decoder)


HD SD Video Decoder
D1(MPEG-2 SD Decoder)
D2(H.264/MPEG-2 HD/SD Decoder)
D3(H.264 HD Decoder)


Audio Embedder
e1


Audio De-embedder
e2


HD Video Converter
C1(3G/HD/SDI to HDMI)
C2(HDMI to 3G/HD/SDI)
C3(SDI to CVBS)
C4(CVBS to SDI)
C5(YPbPr to HD-SDI)
C6(HD-SDI to YPbPr)
C7(Analog Video to 3G/HD/SDI)
C8(3G/HD/SDI to Analog Video)
C9(VGA to 3G/HD/SDI)
C10(3G/HD/SDI to VGA)
C11(CVBS to HDMI)
C12(HDMI to CVBS)


3G/HD/SDI UP Down Converter
X1 


HD Video Splitter
S1(SDI/ASI Splitter)
S2(HDMI Splitter)


L-Band Splitter
LS


Audio Converter
AC1(A/D)
AC2(D/A)


Audio Splitter
AS1(AES/EBU Digital Audio)
AS2(Analog Audio)


3G/HD/SD-SDI
HD Video Matrix Switcher
MS1(4x4, 8x8, 16x16)


HDMI Twisted Pair Extender
M1  


 


Doteck LS Series

Datasheet


 

Doteck LS Series L-Band Splitter

Doteck

Doteck
Features
tThis equipment is input and output are 75Ω inch F-type plug
tPerfect LED indicators design, very convenient to monitor device work well or not
tPCB boards made with environment friendly Pb-free
tPCB boards made with multilayer design, to ensure stable and reliable signal conversion
tAll components, including connectors, are ordered from public-known manufacturers in the world, high stability and reliability ensurance
tEnclosure box material is made of aluminum, elegant and exquisite appearance, and light weight
tSwitching power supply design, wide voltage range, reliable long-term running
t19-inch width 1RU height standard box design, convenient to setup and operate

Introduction
tDoteck LS series L-band(950MHz~2150MHz) active power divider, which can easily distribute vertical or horizontal polarization signals and meet the needs of 8 branches. With the microstrip design technology, the isolation degree can reach more than 20dB.The front panel is equipped with the LNB power switch, and the power supply mode of LNB can be freely selected: 13V, 18V. The back panel has a LOOP output port, which can provide the input signal of the back stage for cascade connection.

Technical Specifications

RF parameters

Frequency range

950~2150MHz

Level input

-45~-20dBm

Level output

-30~-25dBm

Smoothness

±1.0dB(950~2150MHz)

Input impedance

75Ω

RF return loss

12dB

RF connector

F-type

Noise figure

42dB

LOOP insertion loss

0±3dB

LNB power supply

13V/18V


Physical

Dimension(H×W×D, mm)

44×433×343(mm)

Power supply

130-260VAC, 50/60Hz

Power consumption

<10W

Operating temperature

0-50℃

Relative humidity

0-95%, non-condensing

LED indicator

Power

 
 
Copyright© 2001 - 2022, Doteck.com, all rights reserved.
Doteck Video USA
Doteck China
Stay connected and follow DoteckDoteck